Endless mods emmi the pocket rocket Published on 18-Feb-2020 by Thevapemanphotos



The Mod is 22m diameter and just 78mm long. The RDA, which comes with a BF pin for you flavour chasing squonkers out there, is just 22mm high and has a standard 510 drip tip fitting, although the rda works perfectly well without any drip tip. The kit comes complete with Mod, RDA and spares set including the BF pin for the RDA.

The mod uses a different mechanism for “switching” The body carries a contact tube, that is vented, and makes for a permanent contact at the bottom of the mod. There’s a delrin sleeve that goes on top of the battery followed by a coned spring that sits between the delrin battery sleeve and the hybrid, knurled top cap. Although the switch is operated in the conventional way the contact is made at the rda end of the mod. This enabled us to greatly reduce the height of the mod and makes for a nice clean contact every time.

The contact in the switch sleeve is fully removable for cleaning purposes

The RDA again is a unique 2 post deck. Our aim with this deck was to make it as simple as possible to build on for the inexperienced but give big enough post holes for the more experienced, elaborate builders out there and I think we created the perfect deck for this. Designed to carry a single coil (0.15 ohms and above is recommended to get the best out of the RDA) the semi restrictive air flow, domed internals on the top cap and the small chambers creates exquisite flavour compared to bigger RDAs.  

Available in 4 colour options:
Black Chrome over Brass
Silver Plated over Brass
Neo Chrome over Brass

Endless mods yet again created a practical yet powerful mech tube use thevapeman10 over at shade e vaping 

Also thanks to www.vibeavape.com (tvmp15) and coolwhic for there sponsors 

Any mechanical or rebuilds please have a good knolage of ohms laws and battery safety before trying 

All videos are intended for over  18

Comments 0 Comments